Connecting The Cables; Initial Setting - Vixen Starbook-S User Manual

Connecting the Controller and Motor Cables
(1) Connect the RA motor and DEC motor with the motor cable as shown in the figure. Orient
the motor cable plug so that it fits in the socket on the motor properly.
(2) Connect the STARBOOK-S controller cable to the motor control board. Orient the controller
cable plug so that it fits in the socket on the motor control board properly. Tighten the lock
screws on the controller cable plug securely.
(3) Connect the controller cable to the STARBOOK-S. Orient the controller cable plug so that it
fits in the socket on the STARBOOK-S properly until it clicks.
Warning!
Never connect the controller cable to other instruments such as a PC. It may cause a power
failure, overheating, or electric shock. Please do not attach the controller cable to the LAN
connection terminal. The connection size is similar.
Use the supplied battery box by connecting the cable from the battery box to the motor control
board.
* An optional Vixen AC Adapter 12V 3A is available for the drives of the motors.
When using an external DC 12V power supply or an optional AC adapter 12V 3A, be sure to
connect the power cable to the mount before turning on the power switch.
External power terminal DC 12V EIAJ RC5320A Class 4

INITIAL SETTING

13