Vixen Starbook-S User Manual page 58

Requirements
1 STARBOOK-S controller
2 Power Supply for STARBOOK-S
3 PC (Computer) for data transfer (Ethernet Card on PC)
4 LAN crossover cable
Procedures (for Windows)
(1) Download the latest firmware version from STARBOOK-S updates information to a directory
on your PC.
(2) Connect the STARBOOK-S and the PC with the LAN crossover cable.
*As for a connection of the LAN cable to the PC, please refer to the instructions for the PC.
(3) Turn on the STARBOOK-S.
(4) Turn on the PC.
(5) Wait for a period of one minute. The STARBOOK-S and PC acquire information on
networking automatically.
(6) In the STARBOOK-S menu, go into About STARBOOK-S. Write down the IP address &
Subnet mask numbers. Make a note of the version and build to compare with after the update.
(7) Open the update program that you downloaded in (1). (e.g. Update32.exe)
(8) You should be at the update program screen. Enter the STARBOOK-S IP address as you
obtained at (6).
Click on the OK button.
(9) Wait for a couple of minutes until the message below appears on the screen. It shows you
58