Vixen Starbook-S User Manual page 61

The STARBOOK-S will have the IP Address automatically at the time of turning on the power
supply when it is connected to a LAN using a DHCP server or a router.
1 Connect the STARBOOK-S to the LAN using the DHCP or to the router.
2 Turn on the power supply of the STARBOOK-S.
3 Go to the procedure 6 in "How to Update your STARBOOK-S" and follow the directions
thereafter.
(Please refer to the network administrator or a manufacturer of the router for their settings if you
are not familiar with them.)
*Trademarks: Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries. Pentium is a registered trademark or a trademark of Intel Corporation.
End.
61