GE P2S975 Installation Instructions Manual page 13
Self-cleaning dual fuel slide-in range
Hide thumbs
Also See for P2S975:
- Owner's manual (136 pages) ,
- Installation instructions manual (60 pages) ,
- Brochure (11 pages)
Table of Contents
Advertisement
Available languages
Available languages
Installation Instructions
shock might result.
Electrode
a. Place the burner head onto the burner
Burner base
base, making sure that the head is properly
,
Stability '
the slot in the
chamber
Medium
Burner base
oriented over the burner base and the
Front left
electrode. Make sure to place the correct
burner, back
burner head on the correct burner base
right burner
and that the burner head sits level on the
and back left
burner base. The burner heads are not
burner
STI.
interchangeable.
Make sure
re 7
Electrode
The burner cap
has three to four pins. When
placing the cap,
make sure none of the pins sits in the stability
chamber.
e
e-
Front of range
b. Place the burner
caps on the burner
heads, making sure
to place the correct
Burner cap properly seated
burner cap on the
correct burner head.
The burner caps are
not interchangeable.
Make
sure that the
Large head
Extra large head
d. Place the burner grates over the burners.
burner caps are
properly
seated
on
Burner cap not properly seated
the burner heads.
13
Advertisement
Table of Contents
Need help?
Do you have a question about the P2S975 and is the answer not in the manual?
Questions and answers
How to remove top to get at burner igniters
To access the burner igniters on a GE P2S975, follow these steps:
1. Ensure Safety: Turn off the gas supply and disconnect power to the range.
2. Remove Burner Caps and Heads: Lift off the burner caps and ensure the burner heads are properly positioned for removal.
3. Avoid Touching Electrodes: Be careful not to touch the electrodes while another burner is on to prevent electrical shock.
4. Lift the Cooktop: After removing the burner heads, carefully lift the cooktop to access the burner igniters.
Make sure all parts are reassembled correctly after maintenance.
This answer is automatically generated