Installation; Before You Start - Safety Vision LED7B-TS User Manual

INSTALLATION

Before You Start

To reduce the risk of electric shock, disconnect the vehicle battery
•
before installing the monitor.
Do not install the monitor where it may interfere with safe vehicle
•
operation or prevent air bag deployment.
To allow adequate air circulation around the device, leave at least two
•
inches of space between the monitor and walls, cabinets, or other
objects.
Route cables where they may not be pinched, stepped on, or interfere
•
with passenger mobility.
Do not bend, force, or overtighten connections.
•
Before connecting the monitor, confirm the output voltage of the
•
power supply is between 10 and 32V DC.
When connecting the monitor to a power supply, observe polarity to
•
prevent damage.
4
LED7B-TS / LED10B-TS USER GUIDE