Wire - Safety Vision LED7B-TS User Manual

(Wiring cont.)
4. Connect the individual wires on the wiring harness as follows:

WIRE

VCC Ignition power 10-32V DC
GND Ground
Reverse
TRIG 1
TRIG 2 When activated, the monitor receives input from camera 2.
TRIG 3 When activated, the monitor receives input from camera 3.
TRIG 4 When activated, the monitor receives input from camera 4.
10
LED7B-TS / LED10B-TS USER GUIDE
(typically connected to vehicle's backup
When activated, the monitor receives input from
•
camera 1.
DESCRIPTION
lights).