Standard - Safety Vision LED7B-TS User Manual

Standard

Tap the Standard icon to display the following menu
Standard determines the resolution and video format type for each camera.
IMPORTANT: Safety Vision recommends keeping Automatic toggled On (default).
To manually set up camera resolution and video format type
(not recommended),
1. Toggle the switch on the
right of Automatic to
enable manual set up.
2. Tap Setup next to the
desired camera.
3. Adjust Video Format Type
and Resolution settings as
desired.
NOTE: If video format type is PAL or NTSC, resolution selection will become
unavailable.
To exit, tap the
LED7B-TS / LED10B-TS USER GUIDE
Off to
icon.
23