Preset Tuning; Receiving Fm Simulcast Tv Programs - Pioneer VSX-425 Operating Instructions Manual

[FREQUENCY PRESETTING =|
10 stations can be preset in ea
total of 30 stations presets.
CLASS 1 = 1to 10 ch
CLASS 2= 110 10 ch
CLASS 3= 1to 10 ch
[ LISTENING TO BROADCASTS USING |
| PRESET TUNING
1. Tune into the desired station.
See the section "TUNING INTO STATIONS". in addi-
tion to station frequencies, the MPX MODE (auto
stereo mode or monaural made) can also be preset
(FM only}.
2. Press the MEMORY button,
The MEMORY indicator lights and station number "--
"ch, and the CLASS indicator flash. (Memory mode).
3. Select the desired class (1-3) with the CLASS button.
4. Press the STATION (+,-) buttons to select the station
you want to memorize.
e The station number lights in the display, indicating
that it has been memorized.
5. Repeat steps 7 to 4 to preset additional stations.
A total of 30 AM and FM stations may be preset, When
you store a new preset, it takes the place of the
previously stored station (if any).
+. Select the class number with the CLASS button,
2. Press the STATION (+,—) buttons to select a station.
3. Adjust the volume and tone controls as desired.
NOTE:
Even if the receiver power cord is unplugged, data remains in
memory for several days. If the contents of the memory are
erased, preset once more.
Last station memory
When the POWER switch is pressed to turn the power on,
the last station received before the power was previously
turned off will be tuned in again.
When the power is ON, if the FM/AM button is pressed,
the last station received before the FM/AM button was
previously pressed will be tuned in again.
aa
RECEIVING FM SIMULCAST TV PROGRAMS
By combining a TV set and a VCR (or TV tuner), you can
receive FM simulcast TV programs (stereo TV sound
transmitted from an FM radio station) while viewing the
video portion on your TV.
i. Select the desired TV program with the TV set.
2. Tune in the desired FM simulcast TV program on the
receiver.
3. Adjust the volume and tone controls as desired.
|
Press the power switch to the ON position, and turn on
the power to the other components you wish to use (for
exampie, TV, VCR, cassette deck, etc.).
14
<ARB7066>