Recording With A Cassette Deck; Video Recording - Pioneer VSX-425 Operating Instructions Manual

[
| PLAYBACK
1, Use the input selector buttons to select the desired
program source.
Program Source
=
| "Input Selector
To play back on a VCR connected i
to the VCR/TAPE 1 jacks, or to
play back ona cassette deck.
VCR/TAPE 1
| To listen to a tape on the cassette
deck connected to TAPE. 2
MONITOR jacks.
| TAPE 2 MONITOR
| To listen to records. PHONO
| To watch a LaserDisc/DVD. | LD/DVD 1
| To listen to compact discs. cD
* if you select a music suurce other than TAPE 2, switch
OFF the TAPE 2 MONITOR.
. Operate the appropriate audio/video component to
playback the program source.
For a video source, switch the TV connected to this
unit to the video input mode.
. Adjust the volume and tone controls as desired.
Refer to pages 3 and 16 for details concerning surround
operation.
| RECORDING WITH A CASSETTE DECK
RECORDING WITH VCR/TAPE 1 |
| RECORDING WITH TAPE 2
lf the TAPE 2 MONITOR button is ON, press to turn OFF.
1. Select the source you want to record from with the
input selector buttons.
When recording to AM or FM broadcasts, select a
preset station using the STATION (+,—) button. If the
desired station has not been preset, tune in the station.
. Start recording on the cassette deck.
. Play the desired program source (record, compact
disc, etc.),
The volume, balance and tone controls have no effect
on the recording.
1. Select the source you want to record from with the
input selector buttons.
Start recording on the TAPE 2 cassette deck.
Play the desired program source (record, compact
disc, etc.).
The volume, balance, and tone controls have no effect
on the recording.
When copying a tape, playback on the VCR/TAPE 1
cassette deck and record on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped
with monitoring function, the recorded sound can be
monitored through the speaker system by pressing the
TAPE 2 MONITOR button to ON.
2.
3.
| | VIDEO RECORDING
1. Select the source to record from with the input selec-
tor buttons.
When recording from a LaserDisc to VCR ~ LD/DVD
2. Begin recording on the VCR.
For VCR, select a line input (externai input).
3. Begin playback on the component selected with the
input selector.
The volume, balance and tone controls have no effect
on the recording.
15
<ARB7066>