Advertisement
Available languages
Available languages
6. Take outer blade collar and saw blade off the
saw spindle.
7. Clean clamping surfaces of saw spindle and
saw blade.
A
Danger!
Do not use cleaning agents (e.g. to remove
resin residue) that could corrode the light
metal components of the saw; the stability of
the saw would be adversely affected.
8. Put on a fresh saw blade (observe direction of
rotation!).
A
Danger!
Use only suitable saw blades (see „Technical
specifications") – when using unsuitable or
damaged blades parts could be explosive-
like hurled from it by the centrifugal force.
Do not use:
- saw blades made of high speed steel
(HSS);
- saw blades with visible damage;
- cut-off wheel blades.
A
Danger!
- Mount saw blade only using genuine parts.
- Do not use loose-fitting reducing rings; the
saw blade could work loose.
- Saw blades have to be mounted in such
way that they do not wobble or run out of
balance, and can not work loose during
operation.
9. Slide outer blade collar onto saw spindle. The
tappet on the inner blade flange must fit into the
recess in the outer blade flange.
10. Screw on the arbour bolt (left-hand thread!)
Tighten hand-tight only with the tool supplied.
TKHS 315 E
A
Danger!
- Do not tighten arbor bolt by hitting on the
wrench.
- After tightening the arbour bolt do not
forget to remove the lock bar/wooden
block!
11. Fit table insert extrusion flush into the saw
table's slot.
12. Turn flat head screw counterclockwise by 1/4
turn to lock the table insert extrusion in position.
Saw cleaning and lubrication
1. Remove chips and saw dust with vacuum
cleaner or brush:
- the saw blade's rise and fall mechanism;
- the chip case;
- from motor vent slots
2. Apply a light coat of oil to the saw blade's rise
and fall mechanism.
Machine transportation
· Lower saw blade completely.
· Dismount any add-on parts, projecting over the
saw.
· Carry saw with two persons; hold at saw table.
· If possible, pack in the original carton for ship-
ping.
Saw storage
A
Danger!
Store saw so that
- it can not be started by unauthorized per-
sons and
- nobody can get hurt by the stored
machine.
A
Caution! Do not store machine unprotected
outdoors or in damp environment.
2.18
Advertisement
