Bosch SMV2ITX23E Instructions For Use Manual page 5

Hide thumbs Also See for SMV2ITX23E:
Table of Contents

Advertisement

WARNING - Risk of electric shock!
Improper installations are dangerous.
Only connect and operate the device in accordance with the
information on the nameplate.
▶ Always use the power cable supplied with the new device.
▶ Only connect the device to an alternating current power supply
via a properly installed earthed socket.
The protective conductor system of the electrical house
installation must be installed correctly.
▶ Never power the device via an external switching device,
e.g. B. timer or remote control.
▶ When the device is installed, the mains plug of the mains
connection cable must be freely accessible, or if free access is not
possible, a disconnecting device must be installed in the fixed
electrical installation in accordance with the installation
regulations.
▶ When setting up the device, ensure that the power cable is
not pinched or damaged.
Cutting the inlet hose or submerging the Aquastop valve in
water is dangerous.
▶ Never immerse the plastic housing in water. The plastic housing
on the inlet hose contains an electric valve.
▶ Never cut the inlet hose. There are electrical connection cables
in the inlet hose.
WARNING - Danger of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶ Do not use extension cables or multiple socket strips.
▶ Only use adapters and power cables approved by the
manufacturer.
▶ If the mains connection cable is too short and a longer mains
connection cable is not available, contact a specialist electrician
to adapt the house installation.
Securityde
5

Advertisement

Table of Contents
loading

Table of Contents