Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bosch SMV2ITX16G
Summary of Contents for Bosch SMV2ITX16G
- Page 1 Dishwasher SMV2ITX16G [en] Information for Use...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Etagere ........... 21 General information...... 4 Baking sheet spray head .... 21 Intended use........ 4 Before using for the first time .. 22 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 4 tion.......... 22 Safe use ........... 6 Damaged appliance ...... 8 Water softening system.... - Page 3 Technical specifications.... 55 Terminate programme.... 32 Information regarding Free and Switching off appliance .... 32 Open Source Software .... 56 Basic settings........ 33 Declaration of Conformity .... 56 Overview of basic settings ..... 33 Home Connect ...... 35 Home Connect quick start ..... 35 Home Connect settings.... 36 Remote Start ...... 36...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety ¡ Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. ▶... - Page 7 Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety ▶ Never kink, crush or modify the power cord. Damaged appliance WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. - Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
-
Page 10: Preventing Material Damage
en Preventing material damage pipes supplied for the drinking Preventing material damage Preventing material dam- water and waste water connec- tions are not affected here. ¡ Modified or damaged water hoses may result in material damage and Preventing material damage Safe installation damage to the appliance. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may If you do not have much tableware to damage the appliance. wash, use the additional Half Load Do not use a steam cleaner. function. ▶ So as not to scratch the finish ▶... -
Page 12: Installing And Connecting The Appliance
en Installation and connection Note: The appliance has been tested Connect the appliance to the at the factory to check it is in working power supply. order. It is possible that water has left marks on the appliance. These Drainage connection marks will disappear after the first Connect your appliance to drainage wash cycle. -
Page 13: Electrical Connection
Installation and connection en Electrical connection Connecting the appliance to the electricity supply Notes ¡ Please follow the "Safety instruc- tions" → Page 4. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 55. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 22 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 4 5 6 7 "Switching on the appliance" → Page 30 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 18 Programme button "Programmes" → Page 18 Programmes Water supply display Display for water supply Programme sequence display The programme sequence display shows the cur- rent cycle of the appliance, e.g.
- Page 17 Familiarising yourself with your appliance en Special salt refill indicator Water softening system → "Adding special salt", Page 23 Depending on the appliance specifications...
-
Page 18: Programmes
en Programmes Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 19: Information For Test Institutes
Additional functions en Programme: Programme sequence Additional func- tions Tableware: Time-optimised: Extra Dry → "Additional ¡ Cleaning mixed table- ¡ Cleaning 65 °C Express 65° - 1h ware and cutlery. functions", ¡ Intermediate rinse Level of soiling: Page 19 ¡ Final rinse 69 °C ¡ Removing common ¡... -
Page 20: Features
en Features Top basket Additional func- tion Arrange cups, glasses and small ¡ The additional function items of tableware in the top basket. can be activated before the start of the pro- gramme and at any time when the pro- gramme is running. ¡... -
Page 21: Cutlery Basket
Features en If you do not need the cutlery shelf, you can fold it up. Baking sheet spray head Use the baking sheet spray head to clean large items of tableware, e.g. trays, grilles and plates. Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards. -
Page 22: Before Using For The First Time
en Before using for the first time Insert the baking sheet spray head Home Connect app. in the holder and turn to the → "Home Connect quick start", right . Page 35 Requirement: "The appliance has been installed and connected." → Page 11 "Add special salt." → Page 23 "Add rinse aid."... -
Page 23: Overview Of Water Hardness Settings
Water softening system en Overview of water hardness settings You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester. Water hard- Hardness mmol/l... -
Page 24: Switching Off The Water Softening System
en Water softening system to the dispenser for special salt stances. According to manufactur- immediately before the pro- ers, combined detergents with salt gramme starts. replacement substances can gen- erally only be used up to a water Unscrew the lid of the dispenser hardness of 26 °E without adding for special salt and remove. -
Page 25: Rinse Aid System
Rinse aid system en Add rinse aid up to the max mark. Regeneration of the water softening system after x rinse cycles Additional run time in minutes Additional water consumption in litres Additional power consumption in 0.05 The consumption values specified are laboratory measurements determ- ined in accordance with the currently applicable standard and using the... -
Page 26: Switching The Rinse Aid System Off
en Detergent – A higher setting adds more Modern, powerful detergents mainly rinse aid during the wash cycle, use a low-alkaline formulation with reduces water marks and im- enzymes. Enzymes break down proves the drying result. starch and remove protein. Oxygen- based bleaching agents are generally To save the settings, press used to remove coloured marks, e.g. -
Page 27: Unsuitable Detergents
Detergent en Tip: Suitable detergents are available Unsuitable detergents online via our website or from "Cus- Do not use detergent which could tomer Service" → Page 54. cause damage to the appliance or Separate detergents present a risk to health. Separate detergents are products Detergent Description that do not contain components other... -
Page 28: Adding Detergent
en Tableware ¡ The function of rinse aid is limited Close the lid of the detergent dis- with combined detergents. You will penser. generally get better results using rinse aid. ¡ Use tablets with a special drying performance. Adding detergent To open the detergent dispenser, press the locking latch. -
Page 29: Damage To Glass And Tableware
Tableware en Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Only put glasses and china in the is too high. ures. dishwasher if it is marked as dish- After the programme washer-safe by the manufacturer. -
Page 30: Removing Tableware
en Basic operation To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 31: Setting A Programme
Basic operation en a While the programme is running, a Setting a programme spot of light is projected onto the To adjust the wash cycle to the soil- floor below the appliance door. ing level of the tableware, select a This light will not be visible if the suitable programme. -
Page 32: Terminate Programme
en Basic operation Press to resume the pro- gramme. Close the appliance door. Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Open the appliance door. Press for approx. -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Water hardness Scale with 4 levels Set the water hardness. - Page 34 en Basic settings If LED A lights up, the function is Setting Extra Dry permanently deactivated. Press . If LED A and LED B light up, the To open the appliance settings, function can be selected using the press for 3 seconds. button.
-
Page 35: Home Connect
Home Connect en Home Connect quick start Home Connect Home Connect Connect your appliance to a mobile This appliance is network-capable. Home Connect device quickly and easily. Connect your appliance to a mobile Installing app device to control its functions via the Home Connect app. Install the Home Connect app on The Home Connect services are not your mobile device. -
Page 36: Home Connect Settings
en Home Connect Home Connect settings Remote Diagnostics Adapt Home Connect to your needs. Customer Service can use Remote You can find the Home Connect set- Diagnostics to access your appliance tings in the basic settings for your ap- if you contact them, have your appli- pliance. -
Page 37: Cleaning And Servicing
Dishwasher Care and Ma- Cleaning and servicing Cleaning and servicing chine Cleaner for Dishwashers online at https://www.bosch-home.com/ To keep your appliance working effi- Cleaning and servicing store or from customer service. ciently for a long time, it is important to clean and maintain it carefully. -
Page 38: Filter System
en Cleaning and servicing Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform-... - Page 39 Cleaning and servicing en Press the locking catches Fine filter gether and lift the coarse filter out Coarse filter . Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system ...
-
Page 40: Cleaning Spray Arms
en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 41: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... -
Page 42: Washing Results
en Troubleshooting Fault Cause Troubleshooting Display for water supply Check the water connection for lights up leaks. Restore the power supply. Switch the appliance on. Wastewater hose is blocked Reposition the wastewater hose or kinked. without kinks. Remove residues. Siphon connection is still Check the connection to the siphon ▶... - Page 43 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Programme or programme "Select a programme with drying, ▶ option has no drying phase, e.g. intensive, strong or ECO pro- gramme." → Page 18 or the drying phase is too brief. Some option buttons decrease the drying result, e.g varioSpeed.
- Page 44 en Troubleshooting Fault Cause Troubleshooting Appliance interior still wet Not a fault. The condensa- No action required. after wash cycle. tion drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
- Page 45 Troubleshooting en Fault Cause Troubleshooting Detergent residue in the ap- Lid of the detergent dis- Arrange tableware in the top basket pliance penser is blocked by items tableware so the tab collecting tray of tableware parts and will is not obstructed by tableware. → "Arrange tableware", Page 29 not open.
- Page 46 en Troubleshooting Fault Cause Troubleshooting Stubborn white coatings are Detergent substances are Change your "detergent" ▶ → Page 26. present on tableware, inside deposited there. These coat- the appliance or the door. ings cannot generally be re- Clean the appliance mechanically. ▶ moved with chemicals. The hardness range is set in- Set the Water softening system to ▶...
- Page 47 Troubleshooting en Fault Cause Troubleshooting Coloured coatings (blue, yel- may not always be possible to com- low, brown) that are difficult pletely remove deposits but they or impossible to remove are are harmless to health. present inside the appliance or on stainless steel table- ware.
- Page 48 en Troubleshooting Fault Cause Troubleshooting Removable streaks are Tableware has been pre- Only remove large remnants of food ▶ present on glasses, glass- cleaned too intensely. The and do not prerinse tableware. ware with a metallic appear- sensors chose a weaker pro- ance and cutlery.
-
Page 49: Home Connect Problem
Troubleshooting en Fault Cause Troubleshooting Excessive formation of foam Detergent or appliance care Change the brand of detergent. ▶ occurs. product used causes excess- ive foaming. Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶... - Page 50 en Troubleshooting Fault Cause Troubleshooting → "Terminate programme", Water is left in the appliance ▶ at the end of the pro- Page 32 gramme. Appliance cannot be Software update is taking Wait until the software update has ▶ switched on or operated. place. finished.
-
Page 51: Mechanical Damage
Troubleshooting en Fault Cause Troubleshooting All LEDs lit up or flashing. Electronics have detected a Press the main switch button for ap- fault. prox. 4 seconds. → "Controls", Page 15 The appliance is reset and restar- ted. If the problem occurs again: Switch off the appliance. ‒... - Page 52 en Troubleshooting Fault Cause Troubleshooting Knocking or rattling noise. With a small load the water Distribute the tableware evenly. ▶ jets directly strike against Load the appliance with more table- ▶ the tub. ware. Light items of tableware Position light items of tableware se- ▶...
-
Page 53: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 54: Protect Appliance From Frost
en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 55: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance. - Page 56 A detailed Declaration of Conformity and additional documents). Alternat- can be found online at www.bosch- ively, you can request the relevant in- home.co.uk among the additional formation from oss- documents on the product page for request@bshg.com or BSH Hausger-...
- Page 57 Declaration of Conformity en 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. 100 mW UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the SMV2ITX16G and is the answer not in the manual?
Questions and answers