Device; Waste Water Connection; Drinking Water Connection - Bosch SMV2ITX23E Instructions For Use Manual

deSetting up and connecting
The delivery consists of: ¡
dishwasher
¡Instructions for use
¡assembly Instructions
¡Further information documents ¡
Mounting material
¡Vapor protection
¡Power cord
¡quick start Guide
4.2 Set up and connect the

device

You can install your under-counter
device or integrated device in the
kitchen unit between wooden walls
and plastic walls. If you subsequently
set up your device as a free-standing
device, you must secure your device
against tipping over, e.g. B. by
screwing on the wall or by installing it
under a continuous worktop that is
firmly connected to the neighboring
cabinets.
Follow the safety instructions.
1.
→ page 4
Follow the instructions for electrical
2.
connection.
Check the scope of delivery and
3.
the condition of the device.
Take the required installation dimensions
4.
from the assembly instructions.
Set up the device horizontally using
5.
the adjustable feet.
Make sure you have a secure footing.
Install the waste water connection.
6.
→ page 12
Install the drinking water
7.
connection. → page 12
Connect the device to power.
8th.
12

4.3 Waste water connection

Connect your device to a wastewater
connection so that water
contaminated by the rinse cycle can
drain away.
Install waste water connection
Please refer to the assembly
1.
instructions provided for the
necessary steps.
Connect the waste water hose to
2.
the drain connection of the siphon
using the included parts.
Make sure that the drain hose is not
3.
kinked, crushed or twisted.
Make sure that there is no cover in
4.
the drain that prevents the waste
water from flowing out.

4.4 Drinking water connection

Connect your device to a drinking
water connection.
Install drinking water connection
Hints
¡Make sure you do that
Connect the device to a water inlet
with a safety device to prevent
drinking water contamination
through backflow (according to DIN
EN 1717). The connection valves/
water taps provided for this purpose
are equipped with this safety device
if the house is installed correctly.
¡If you replace the device,
you must use a new water inlet
hose.
Please refer to the assembly
1.
instructions provided for the
necessary steps.