Using The Flash; Setting The Lcd Brightness - Vivitar Vivicam 3710 User Manual

Using the Flash

Your camera has two flash settings:
ð
Auto-flash: the flash fires automatically
according to lighting conditions. Use this
mode for general photography
ð
Flash Off: the flash won' t fire under any
circumstances.
capturing images in a place where flash
photography is prohibited, or when the
subject is distant (beyond the range of
the flash).

Setting the LCD Brightness

Three brightness settings are available:
ð
Low LCD Brightness: Normally
sufficient in dim lighting conditions
ð
Normal LCD Brightness: Use in
intermediate lighting conditions. This
is the default setting.
ð
High LCD Brightness : Use in bright
conditions.
Use this mode when
Note
The flash cannot be used when battery power is
low ( ).
16