Making Slide Shows; Playing Movie Clips - Vivitar Vivicam 3710 User Manual

Making Slide Shows

You can set your camera to display images one after another in turn. To start a slide show:
1. When in Playback Mode, press the Enter
button to open the Options Menu appears.
The Display Mode submenu is the first item.
2. Use the Up or Down direction key to highlight
the Slideshow icon (
3. Press the Enter button again to launch the
slideshow. Stored images will be displayed in
succession.
4. To halt the slideshow, press the Enter button.

Playing Movie Clips

Playing movie clips is as simple as viewing stored images. Follow the instructions for displaying
single images above. Use the up and down direction buttons to cycle through stored images
until you locate the desired movie clip, the first frame of which will be displayed tagged with a
movie icon ( ). Press the shutter button to play the movie clip and a second time to stop
playing.
Deleting Images & Movie Clips
Deleting unwanted images and movie clips helps free up memory capacity. You can delete
images and movie clips individually or delete all images and movie clips together.
).
Note
If a memory card is fi tted, you can delete only
those images and movie clips stored on the card.
Note
Images on a write-protected memory card
cannot be deleted.
Caution
Images and movie clips that have been deleted
cannot be recovered.
25