Table of Contents
Advertisement
Using the Flash
The flash is designed to function automatically when lighting conditions warrant the
use of flash. You can take an image using a desired flash mode to suit your
circumstances.
1. Rotate the mode dial to A ,
or *).
2. Press the power switch to turn on the
power.
3. Press the four-way controller ( t/j ). The
flash mode changes each time the button
is pressed. You can also change the
setting using the four-way controller
( À•).
4. Press the OK button to confirm the setting.
5. Compose your scene and press the shutter release bu tton.
ViviCam 7330 has four flash modes: Auto, Auto + Red-eye, Flash on and Flash off.
The table below will help you to choose the appropriate flash mode:
iA Auto
m Red-eye
ai
Flash on
Flash off
®
EN-20
P , L,
The flash fires automatically according to the photographic
conditions.
Use this mode to reduce the red-eye effect when you want to take
natural-looking photographs of people and animals in low-light
conditions. When taking photographs of people, the red-eye effect
can be reduced by increasing the room lighting if possible and
having your subject not look directly into the camera. The
camera's pre-flash and slight delay in this mode will also help to
i mprove your images.
The flash will always fire regardless of the surrounding brightness.
The flash will not discharge, regardless of the brightness. Use this
mode when taking pictures using indoor lighting, for stages and
indoor competitions, and when the subject is too far away for the
flash to be effective.
r,
=4~
S°
0
Flash Mode
Auto
-
OK :
Advertisement
Table of Contents
