Connecting Your Camera To A Computer - Vivitar Vivicam 3710 User Manual

Connecting Your Camera to a Computer

Your camera connects to a computer using the USB cable provided with the camera.
1. Connect the computer and
camera with the supplied USB
cable.
Transfer your images to your
2.
mputer.
co
Mass Storage Mode
The RED status LED will light when the camera is connected to the computer and in Mass
Storage Mode. Image and movie files can then be found on your computer at "My
Computer\Removable Disk\DCIM\". Under this mode, you can read, delete, move, or copy
any image or movie files you want.
PhotoImpression 3.0 and VideoImpression 2.0 to edit the images and movie clips, if
necessary .
Use the bundled application software ArcSoft
29
USB Port