Turning The Camera On And Getting Started; Turning The Camera Off - Vivitar Vivicam 3710 User Manual

Turning the Camera On and Getting Started

To turn on once the batteries are loaded:
1. Open the lens cover first, and then press down and hold the power
button for ONE second.
2. When the camera is turned on, the GREEN LED underneath the
direction button will light up.
ð
To capture a picture, press the shutter button. For full details turn to
Capturing Images in Section 3.
ð
To view stored images press the mode button once to move to
Playback Mode. Press a second time to return to Camera Mode. For
full details turn to Section 4, Playback Mode.
ð
To capture a movie clip, press the PC mode/movie button to
temporarily switch to Movie Mode then the shutter button to start filming.
For full details of capturing movie clips turn to Capturing Movies in
Section 3.

Turning the Camera Off

To turn off the camera:
1. Press down and hold the power button for ONE second. The GREEN
LED will light out.
2. Close the lens cover.
Note
If you only want to use the camera in Playback
Mode (i.e. you don't intend to capture any
images) you do not have to open the lens cover
before turning on the camera.
Note
The camera will turn itself off automatically if it is
left unused for THREE minutes.
8