Tvvirtual Surround Settings(Tvs) - Sony DVP-NS725P Operating Instructions Manual

Current audio format*
Currently playing program format**
*"PCM," "DTS," or "DOLBY DIGITAL" is
displayed.
In the case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
Rear component 2
Front component 2+ LFE (Low Frequency
Center component 1 Effect) component 1
**The letters in the program format display
mean the following sound component:
L: Front (left)
R: Front (right)
C: Center
LS: Rear(left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
,{i, Hint
For Dolby Digital and DTS, "LFE" is always
enclosed in a solid line regardless of the LFE signal
component being output.
If "DTS" is set to "OFF' in "AUDIO SETUP"
(page 63) the DTS track selection option will not
appeal" on the screen even if the disc contains DTS
_racks.
TVVirtual Surround
Settings(TVS)
When you connect a stereo TV or 2 front
speakers, TVS ('IV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) wilhout using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
slereo "IV.
If the player is set up to output the signal from
the DIGITAL OUT (OPTICAL or
COAXIAL) jack, the surround efl_ct will
only be heard when "DOLBY DIGITAL" is
set to "D-PCM" in "AUDIO SETUP" (page
63).
SUR
4
! PressSUR during playback.
The following display appears.
I_ ITVS DYNAMIC I
2
PressSUR repeatedly to select
one of the TVSsounds.
Refer to the following explanations given
for each item.
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
46