Yamaha Super Tenere ES 2020 Owner's Manual page 55

GEAR
N
STD
1. Function display
2. Damping force adjusting function
3. Use the select switch to select
"HARD", "STD" or "SOFT".
GEAR
N
HARD
1. Damping force setting
4. Push the menu switch.
5. Use the select switch to select the
desired level for the damping
force setting.
GEAR
N
HARD
+3
1. Damping force setting level
Instrument and control functions
1
2
0
1
0
1
TIP
The damping force setting can be set to
7 levels (+3, +2, +1, 0, –1, –2 and –3).
"+3" is the hardest level and "–3" is the
softest level.
6. Push the menu switch.
If the vehicle moves while you are ad-
justing the damping force, the informa-
tion display will change to the display
mode.
GEAR
N
HARD
+3
1. Damping force adjusting function
2. Damping force setting
3. Preload setting pictogram
WARNING
The rear shock absorber assembly
contains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
 Do not tamper with or attempt
to open the cylinder assembly.
 Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
4-38
GEAR
1 1
HARD
2
+3
3
EWA16421
4