Advertisement
Heater
www.HeaterSports.com
Model No's.
HTR6000BBC (With
Feeder) & HTR6000BBCNBF
(Without Feeder)
Serial No.
Write the serial number in the
space above for reference.
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty, call
1-800-492-9334
CUSTOMER CARE
For customer service inquiries,
please call our toll free line
at 1-800-492-9334.
CAUTION
Read all precautions and in-
structions in this manual be-
fore using this product. Keep
this manual for
future reference.
Instructions Date: 07/2022
Version: 00001
DO NOT RETURN TO STORE, CALL 1-800-492-9334
OWNER'S MANUAL
Heavy Duty Pitching Machine
®
*Ball Feeder Shown For Model# HTR6000BBC
1
Advertisement
Table of Contents
Related Manuals for Heater Sports HTR6000BBCNBF
Summary of Contents for Heater Sports HTR6000BBCNBF
- Page 1 Heater Heavy Duty Pitching Machine ® *Ball Feeder Shown For Model# HTR6000BBC www.HeaterSports.com Model No’s. HTR6000BBC (With Feeder) & HTR6000BBCNBF (Without Feeder) Serial No. Write the serial number in the space above for reference. ACTIVATE YOUR WARRANTY To register your product and...
-
Page 2: Read Before Operating
THE ACCURACY OF IT DEPENDS ON THE QUALITY, HARDNESS AND TYPE OF BALLS YOU USE IN THIS MACHINE! HEATER SPORTS RECOMMENDS USING HEATER PITCHING MACHINE BALLS IN THIS MACHINE. THESE BALLS HAVE BEEN PRECISELY CRAFTED TO PROVIDE YOU WITH HOURS OF ACCURATE, TROUBLE FREE BATTING AND FIELDING PRACTICE. OTHER BRAND OF BALLS HAVE NOT BEEN TESTED IN THIS MACHINE AND CANNOT BE VALIDATED AS SUFFICIENT AND SAFE. - Page 3 PARTS *Replacement Parts Available by Calling Heater Sports Housing (A) Leg Assembly (9 Total) Bottom Leg (B): 3x Middle Leg (C): 3x Top Leg (D): 3x Ballfeeder: Motor Section (E) Ballfeeder: Middle Section (F) Ballfeeder: End Section (G) NOTICE: BALL FEEDER & HARDWARE ONLY INCLUDED IF YOU PURHCASED THAT MODEL.
-
Page 4: Leg Assembly
LEG ASSEMBLY STEP 1: Slide leg sections together (See illustration). Lock the sections together by making sure the push pins line-up with each adjoining hole and lock into place. Bottom Section B Top Section D Middle Section C Follow Step 1 to assemble all three legs for the pitching machine. After assembling Pivot Arm and Housing, slide the 3 leg sections into the Housing (A) and secure with the Thumbscrews (Part i). -
Page 5: Pre-Operation
PRE-OPERATION Ensure The Hub & Tire Black Lines Align & Check Air Pressure In Pitching Machine Tires. WARNING: MAKE SURE MACHINE IS UNPLUGGED AND THE TIRES ARE NOT SPINNING DURING THESE OPERATIONS! Pre-Operation #1 Locate Allen Wrench (provided in package) and unscrew (3) three wheel cover screws. -
Page 6: Operation
OPERATION CAUTION! USE HEATER PITCHING MACHINE BALLS FOR THE MOST ACCURATE PITCH POSSIBLE. PITCHING MACHINES THAT USE A WHEEL TO THROW BALLS WILL NOT THROW REAL BALLS AS ACCURATE BECAUSE OF THE SEAMS ON THE BALL. IMPORTANT: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL EXIT! SERIOUS HAND AND BODILY INJURY MAY RESULT IF USED INCORRECTLY! -
Page 7: Heavy Duty
WARNING! WARNING! • Do not put hands or • Heater pitching machine fingers in pitching machine. balls are the most accurate • Make sure all persons are balls for use in the Deuce clear of the ball path and away Machine. Real leather balls from pitching machine before can be used but aren’t as pitching any ball. accurate because of the ball • Make sure you pitch only seams. Batter should be aware one ball at a time. at all times. • Make sure all balls are • Always have legs set on the out of machine before turn- ground before pitching to a ing the pitching machine on. batter or the Deuce • Do not stand in front of Pitching Machine may move pitching machine. and hit the batter causing • Do not operate in moisture. serious physical injury. • Batter must wear NOCSAE • Make sure you pitch only Approved Batting Helmet.
Need help?
Do you have a question about the HTR6000BBCNBF and is the answer not in the manual?
Questions and answers