Advertisement
OWNER'S MANUAL
Base Hit Real Baseball Pitching Machine
www.HeaterSports.com
Model No. BH199
Serial No.
Write the serial number in the
space above for reference.
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty, call
1-800-492-9334
CUSTOMER CARE
For customer service inquiries,
please call our toll free line
at 1-800-492-9334.
CAUTION
Read all precautions and in-
structions in this manual be-
fore using this product. Keep
this manual for
future reference.
Instructions Date: 12/2021
Version: 00001
DO NOT RETURN TO STORE, CALL 1-800-492-9334
®
1
Advertisement
Table of Contents
Related Manuals for Heater Sports Base Hit BH199
Summary of Contents for Heater Sports Base Hit BH199
- Page 1 OWNER'S MANUAL ® Base Hit Real Baseball Pitching Machine www.HeaterSports.com Model No. BH199 Serial No. Write the serial number in the space above for reference. ACTIVATE YOUR WARRANTY To register your product and activate your warranty, call 1-800-492-9334 CUSTOMER CARE For customer service inquiries, please call our toll free line at 1-800-492-9334.
- Page 2 Base Hit depends on the quality, hardness and type of balls you use in this machine! Heater Sports recommends using heater pitching machine balls in the Base Hit machine. These balls have been precisely crafted to provide you with hours of accu- rate, trouble free batting and fielding practice.
- Page 3 PARTS *Replacement Parts Available by Calling Heater Sports Pre-Assembled Pole Clamp Clamp Knob Housing (A) Power Cord Length May Vary Top Pole Hardware Tripod Top Leg Bottom Leg Top Pole Ground Stakes (D) 3x (E) 3x (No Pushpins) (G) 2x...
- Page 4 TRIPOD ASSEMBLY Insert Top Legs (3x D) in to bottom of Tripod (B), making sure the push pins lock in place. Next, insert Bottom Leg (3x E) in to bottom of Top Legs (D), also making sure push pins lock in place. Lastly, insert Top Pole (C) into the top of Tripod (B), securing it tightly with Top Pole Hardware (F).
- Page 5 BALL FEEDER ASSEMBLY Assemble Ball Feeder Install Ball Feeder Port Stack Bottom & Top Trays Port To Ball Entry End of Hardware With Carriage On The Feeder Port. Be Machine By Lining Up Holes Bolt, Flat Washer, Lock Sure to Interlock the Port & on Port With Holes on Washer, and Knob Feeder Slots For A Snug Fit.
- Page 6 PRE-OPERATION WARNING: MAKE SURE MACHINE IS UNPLUGGED AND THE TIRE IS NOT SPINNING WHILE CHECKING Pre-Operation #1 Locate Allen Wrench (provided in package) and unscrew (3) three wheel cover screws. **Important: Periodically inspect the tire to make sure it's not worn out or punctured.
- Page 7 OPERATION CAUTION! USE HEATER PITCHING MACHINE BALLS FOR THE MOST ACCURATE PITCH POSSIBLE. PITCHING MACHINES THAT USE A WHEEL TO THROW BALLS WILL NOT THROW REAL BALLS AS ACCURATE BECAUSE OF THE SEAMS ON THE BALL. IMPORTANT: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL EXIT! SERIOUS HAND AND BODILY INJURY MAY RESULT IF USED INCORRECTLY! Step 1:...
- Page 8 Heater Dimpled Balls are made from durable polyurethane and pitch with pin- point accuracy. Heater Pitching Machine Baseballs are the most accurate and du- rable baseballs available and are recommended for use by Heater Sports. Boasting a long life, Heater Dimpled Baseballs are the only balls you’ll ever need.
Need help?
Do you have a question about the Base Hit BH199 and is the answer not in the manual?
Questions and answers