Table of Contents
Advertisement
BioSense Series Network Video Recorder
•
Display when Preview: Set whether to display the set rules and test results in the preview
interface.
•
Arming: That is, set the deployment time, the default is all-day deployment.
•
Linkage: You can enter the linkage configuration page when the alarm is triggered, and perform
the linkage configuration operation.
•
Detect area: the screen with the mouse to draw the area.
•
Detection type: Set the detection object to be human or vehicle, and an alarm will be triggered
when the object detected in the area is the set value.
•
Advanced Setting:
•
Detection type: Set the target detect type. There are four detection types, all of them will trigger the
alarm. "Target enter" represents that the camera will trigger the alarm once it detects that a target
enters the monitored zone. "Target leave" represents that the camera will trigger the alarm once it
detects that a target leave the zone. "Target enter or leave" represents that the camera will trigger
the alarm once it detects that a target enters and/or leave the zone. The last type is that the camera
will trigger the alarm once it finds that the time that a target staying in the controlled area exceeds
the upper limit of the set and allowed duration.
•
Ratio: moving objects in the screen than the size of the set when the size can be used as a "target".
•
Detect Time: detect the target activity more than this time to trigger the alarm.
According to the above setting, the moving object (automobile) occupying over 150 in the channel
picture has entered the detection area for more than 5s, triggering an area detection alarm, as shown in
Figure 7.32, which is the preview real-time picture Color rectangular box that is identified into the area of
the target).
P a g e
| 51
Figure 7.32 Area Detection
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual
Advertisement
Table of Contents
