Table of Contents
Advertisement
BioSense Series Network Video Recorder
7.4.3.7.
Area Detection
The purpose of this page is to configure the relevant parameters, so that more than the proportion of
moving objects, Enter / leave / Enter or Leave/Loiter in the set detection area, over time detection zone
detection alarm occurs. Interface shown in Figure 7.31, the following page describes the main parameters
of the setting method.
•
Channel: Select the channel.
•
Detect Mode: divided into front-end and local, the two models to the actual capacity of the product
subject, select the front-end mode requires front-end access to IPC support, select the local mode
requires the device support.
•
Enable: Set whether to enable zone detection function.
P a g e
| 50
Figure 7.30 Alarming
Figure 7.31 Area Detection
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual
Advertisement
Table of Contents
