Table of Contents
Advertisement
BioSense Series Network Video Recorder
•
Statistical Time: You can choose the date for statistics. Please note that when you do not choose to
use days as the statistical period, the number of days will correspond to the corresponding time
period.
•
Detection Type: Set the detection object to be human or vehicle, and only the data selected this
option will be show.
•
Detection Line: The four statistical lines corresponding to the target counting module will be show
after selecting them.
•
Export: You can export statistical data to a USB drive, and you can choose to store it in a directory
and file format.
7.4.3.6.
Object Left/Lost
The purpose of this page is to configure the relevant parameters, so that more than the proportion of
objects in the set detection area lost / left over time detection time that goods detection alarm. As shown
in Figure 7.28, the following describes the main parameters on the page set method.
•
Channel Select: Select the channel.
•
Detect Mode: Divided into front-end and local, two models to the actual capacity of the product
subject, select the front-end mode requires front-end access to IPC support, select the local mode
requires device support.
•
Enable: Check to enable the target count.
•
Display when Preview: When enabled, you can see the detection line and the statistical result in
the preview interface.
•
Arming: That is, set the deployment time, the default is all-day deployment.
•
Linkage: You can enter the linkage configuration page when the alarm is triggered, and perform
the linkage configuration operation.
P a g e
| 48
Figure 7.27 Counter Statistics
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual
Advertisement
Table of Contents
