Table of Contents
Advertisement
BioSense Series Network Video Recorder
then click Right after the automatic closure of the formation of the region is the detection area (to set
up a qualified area at least manually draw two lines).
•
Detect Type: Set the detection object to be human or vehicle, and an alarm will be triggered when
the object detected in the area is the set value.
•
Arming: That is, set the deployment time, the default is all-day deployment.
•
Linkage: You can enter the linkage configuration page when the alarm is triggered, and perform
the linkage configuration operation.
7.4.3.4.
Target Counting
P a g e
| 45
Figure 7.23 Smart Motion
Figure 7.24 Target Counting
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual
Advertisement
Table of Contents
