SNAP!
¡CRAC!
Underside of changer
Parte inferior del
cambiador
2. Insert rails (N) into openings in
2. Inserte las barandas (N) en las
SNAP!
¡CRAC!
3. Insert the 3 tabs found on
3. Inserte las 3 lengüetas que se
encuentran en ambos extremos
del cambiador en las ranuras
indicadas de los extremos del
cambiador y asegúrelas a los
montantes.
24
changer end (M). CHECK that
buttons are visible in hole.
aberturas de los extremos del
cambiador (M). VERIFIQUE
que los botones se vean por el
orificio.
either end of the changer into
the designated slots in changer
ends, and secure to the
mounts.