Saxby Lighting BLISS 13799 Instruction Manual

Fitting / Replacing Bulbs
Always use the correct type and wattage bulb. Do not exceed the wattage stated or use a different shape bulb from that
indicated on the fitting.
When changing a bulb, always switch off at the mains and allow the
old bulb to cool down before handling. The entire unit gets hot whilst
on for a period of time.
Dispose of used bulbs carefully and responsibly.
Technical data
Supply
240 V~, 50 Hz
Voltage:
Bulb
Max. 9.2W LED E27 (required)
Type:
Conformity with all relevant EC Directive requirements.
This is a Class 1 product and must be earthed.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is suitable for dimming.
This product is rated at IP44.
44
IP
This product is rated at IK05.
05
IK
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
V2 28/02/2020
Saxby Lighting. BH17 7BY
Max. 9.2W LED E27
Instruction manual
BLISS
13799, 92531
13799
www.saxbylighting.com
92531