Technical Specifications - cecotec POWER ESPRESSO 20 SQUARE PRO Instruction Manual

Water leaks or seepage.
The machine cannot operate
normally, all displays are
on, but do not light up when
pressed.
The tank has run out of
water and when I try to
not come out and makes a
metallic rattling noise.

6. TECHNICAL SPECIFICATIONS

Product reference: 01983
Product: Power Espresso 20 Square Pro
Power: 1450 W
Voltage: 220-240 V
Frequency: 50/60 Hz
Technical specifications may change without prior notice to improve product quality.
Made in China | Designed in Spain
3. The water tank leaks
4. Brewing container with
handle is leaking
The power supply is not
connected
The device has run out of
water in the pipe circuit.
4. Check if the water tank
is installed in place or
damaged.
5.
brewing container with
handle is not pressed
properly.
6.
fine and does not allow
passage.
Check if the socket is properly
plugged in. If the problem
Technical Support Service of
Cecotec.
Follow the procedure
explained in the section
"Procedure after shutdown
due to lack of water in the
tank".
POWER ESPRESSO 20 SQUARE PRO
ENGLISH
32