cecotec POWER ESPRESSO 20 SQUARE PRO Instruction Manual page 32

Note: it is important to perform periodic descaling every two months to reduce incidences
caused by the accumulation of mineral debris in the ducts.
following process:
1. Place a cup in the water outlet in front of the machine.
2.
Resetting to factory settings
Press and hold the double cup button, plug in the power supply and power button and the
factory settings.
Procedure after shutdown due to lack of water in the tank
addition of water again, air enters the internal water path, causing no water to come out in
Process to continue:
Turn the selector to the icon
under the steam pipe.
Situation 2: When the new machine is used for the first time, or is not used for a long time, the
internal drying of the water pump causes the machine not to discharge water.
Process to continue:
- Turn the rotating key until
- Insert the air pump into the water inlet hole of the water tank, then add the appropriate
amount of water. (Fig. 3).
- Pump water into the machine with the water pump. (Fig. 4)
, make sure you have filled the water tank and placed a cup
POWER ESPRESSO 20 SQUARE PRO
ENGLISH
30