Samsung SyncMaster 320PX Manual page 67

. Problems related to audio signals and their solutions are listed below.
NO sound,
Probleros So utions
• Ensure that the audio cable is firmly connected to both the
audio-in port on your LCD Display and the audio-out port on
your sound card.
(Refer to the Connecting the LCD Display )
• Check the voluroe level.
The sound level is too ow.
The sound s too hgh ortoo low.
Check the voluroe level.
If the volume is still too low after turning the control to its
maximum, check the volume control on the computer sound
card or software program.
Adjusts the Treble and Bass to the appropriate levels.
Probleros re at¢.d to the Reroete Co[_tro
F;:ff Note
. Problems related to the reroote control and their solutions are listed.
Prob_eros So utions
The reroote control buttons do not _ Check the polarities (+/-) of the batteries
respond. _ Check ifthe batteries are empty
Check if the power is on.
,_ Check ifthe power cord is securely connected.
'_ Check if a special fluorescent or neon lamp is on in the vicinity.
Question
How can I change the frequency?
How can I Adjusts the resolut on?
How can I set the Powe_" Saving
function?
How can I clean the outer
case/LCD Panel?
Q&A
Answer
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of
the driver used (Refer to the computer or the video card manual for
details.)
,_ Windows XP:
Set the resolution in the Control Panel _ Appearance and
Themes _ Display _ Settings
Windows ME/2000:
Set the resolution in the Control Panel _ Display _ Settings
* Contact the video card manufacturer for details
,_ Windows XP:
Set the resolution in the Control Panel _ Appearance and
Themes _ Display _ Screen Saver
Set the function in the BIOS-SETUP of the computer (Refer to
the Windows / Computer Manual).
,_ Windows ME/2000:
Set the resolution at the Control Panel _ Display _ Screen
Saver
Set the function in the BIOS-SETUP of the computer (Refer to
the Windows / Computer Manual)
Disconnect the power cord and then clean the LCD Display with a soft
cloth, using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case Do not let any
water enter the LCD Display
© 1995~2007 SAMSUNG ALL Rights Reserved