1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SyncMaster 320P
  6. Owner's manual

Samsung SyncMaster 320P Owner's Manual

Samsung lcd monitor owner's manual
Hide thumbs Also See for SyncMaster 320P:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Training Manual, User Manual
SyncMaster 320P

Advertisement

Table of Contents
loading

Related Manuals for Samsung SyncMaster 320P

Summary of Contents for Samsung SyncMaster 320P

  • Page 1 SyncMaster 320P...
  • Page 2 Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Do not disassemble Do not touch Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode.

  • Page 3: Installation

    This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose.
  • Page 4 location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust.
  • Page 5 Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual.
  • Page 6 Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire.
  • Page 7 Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable.
  • Page 8 Adjust the resolution and frequency to the level appropriate for the model. An inappropriate resolution may cause undesirable picture quality. 32 inch (80 cm) - 1360 X 768 Viewing the monitor continuously at a too close angle may result in damage to your eyesight.
  • Page 9 do not swallow the batteries. Keep the batteries out of children's reach. If the batteries are swallowed, see a doctor immediately. When replacing batteries, place the batteries in the correct +/- polarity position as indicated on the battery holder. The incorrect polarity may cause a battery to break or leak and may cause fire, injury, or contamination (damage).
  • Page 10 Model Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. This stand is not for the Floor Standing Type. Unpacking Monitor Manual Warranty Card User's Guide, MDC software, Quick Setup Guide...
  • Page 11 D-Sub Cable Power Cord Speaker Wire Cable Sold separately Wall Mount KIT Speaker Set Stand KIT DVI Cable Other Remote Control Batteries (AAA X 2) Cover-Hole BNC to RCA Semi Stand Adapter Jack...
  • Page 12 Front 1. MENU 2. Navigate buttons (Up-Down buttons) 3. Adjust buttons (Left-Right buttons)/ Volume buttons 4. ENTER 5. SOURCE 1. MENU Opens the on-screen menu and exits from the menu or closes the screen adjustment menu. 2. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values.
  • Page 13 for long periods. Rear For detailed information concerning cable connections, refer to The monitor's configuration at the back may vary slightly depending on the monitor model. RS232C OUT/IN (RS232C Serial PORT): MDC(Multiple Display Control) Program Port DVI IN(HDCP) (PC Video Connection Terminal) : Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) PC IN(RGB) (PC Video Connection Terminal) : Using a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC)
  • Page 14 COMPONENT AUDIO IN [L-AUDIO-R](Component Audio Connection Terminal (Input)) BNC/COMPONENT OUT (BNC/Component Connection Terminal (Output)) - BNC (Analog PC) Connection : connecting the R, G, H, V ports. - Component Connection : connecting the P BNC/COMPONENT IN (BNC/Component Connection Terminal (Input)) 8.
  • Page 15 Connecting the Monitor Remote Control The performance of the remote control may be affected by a TV or other electronic device operating near the monitor, causing a malfunction due to interference with the frequency. The Kensington lock is a device used to physically fix the system to something when using it in a public place.
  • Page 16 1. ON / OFF Turns the monitor On/Off. 2. MAGICNET MagicNet Quick Launch Button. - This fuction does not work for this monitor. 3. MDC MDC Quick Launch Button. 4. LOCK Activates or deactivates all function keys on both the remote control and the monitor except for the Power and LOCK buttons.
  • Page 17 The current picture information is displayed in the top left corner of the screen. 16. EXIT Exits from the menu screen. 17. Up-Down Left-Right buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 18. P.MODE (M/B) When pressing this button, current picture mode is displayed at the bottom center of the screen.

  • Page 18: Mechanical Layout

    Mechanical Layout Monitor Head Stand Speaker Installation VESA Bracket Wall Bracket Installation 1. Mechanical Layout 2. Monitor Head...

  • Page 19: Installation Vesa Bracket

    After your order is placed, installation professionals will visit you and install the bracket. At least 2 persons are needed in order to move the LCD Monitor. Samsung is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions...

  • Page 20: Wall Bracket Installation

    6. Wall Bracket Installation Contact a technician for installing the wall bracket. Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
  • Page 21 1. Insert three Hangers of the set-bracket B into the grooves of the wall-bracket A. 2. Fix set-bracket B and wall-bracket A with screws D. Before installing the set on the wall, connect the cables to the set first.

  • Page 22: Installing The Stand Kit

    Installing the Stand Kit Only the supplied bolts should be used. Samsung Electronics will not be responsible for damages caused by using a base other than those specified. 1. Installing the Semi Stand 1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted.
  • Page 23 3. Insert the stand into the hole at the bottom of the monitor. Insert the screw into the hole indicated and tighten it. (M4 × L15) This stand is designed for adjusting the screen angle. The company is not responsible for any problem caused when using this stand.
  • Page 24 Connecting to a Computer Connecting to a VCR Connecting to a DTV Set Top Box 1. Connecting to a Computer 1. Connect the power cord for your monitor to the power port on the back of the monitor. Trun on the power switch. 2.
  • Page 25 3. Connect the audio cable for your monitor to the audio port on the back of your computer. 4. Turn on both your computer and the monitor. Contact a local Samsung Electronics 2. Connecting to a VCR 1. AV input devices such as VCRs or Camcorders are connected via the AV IN [VIDEO] or AV IN [S- VIDEO] of the monitor using an S-VHS or BNC cable.
  • Page 26 1. Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the DVD player. 2. Connect a Component cable between the BNC/COMPONENT IN - P the P , Y, P jacks on the DVD player.
  • Page 27 1. Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the Set Top Box. 2. Connect a Component cable between the BNC/COMPONENT IN - P and the P , Y, P jacks on the Set Top Box.
  • Page 28 7. Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and MONITOR OUT [L-AUDIO-R] on Monitor. Introduction 2. Beginning : Main Screen Port Selection Power Control Input Source Control 5.
  • Page 29 A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for communicating between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display.
  • Page 30 Main Icons Remocon Safety Lock Port Selection 1. Use the main icons to switch to each screen. 2. Enables/Disables the remote control signal receiving function of the display unit. 3. The setting for the PC Serial Port can be changed. The original value is COM1. 4.
  • Page 31 1. Multiple Display Control is originally set to COM1. 2. If any port other than COM1 is used, COM1 to COM4 can be selected in the Port Selection Menu. 3. If the exact port name which is connected to the monitor using a serial cable is not selected, communication will not be unavailable.
  • Page 32 Power Control allows the controlling of some of the functions of the selected display. 1) Power On/Off - Turns the power of the selected display On/Off. 2) Volume Control - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets and displays it in the slider. (When canceling the selection or choosing Select All, the value returns to the default value 10) 3) Mute On/Off - Enables/disables the Mute function of the selected display.
  • Page 33 - Changes the Input Source of the selected display to DVI. 4) AV - Changes the Input Source of the selected display to AV. 5) S-Video - Changes the Input Source of the selected display to S-Video. 6) Component - Changes the Input Source of the selected display to Component. 7) MagicNet - The Input source of MagicNet works only for the MagicNet model.
  • Page 34 The Info Grid shows some basic information necessary for the Image Size Control. 1) Click the AV, S-Video, Component tab to adjust Image Size for AV, S-Video, Component. Click Select All or use the Check Box to select a display to control. 2) The Info Grid only shows the display with AV, S-Video, Component or DVI(HDCP) as the input source.
  • Page 35 The Input source of MagicNet works only for the MagicNet model. 7. PIP Control - PIP Size 1. Click on PIP from the main icons and the PIP Control screen appears. Click Select All or use the Check Box to select a display to control. The Info Grid shows some basic information necessary for the PIP Size Control.
  • Page 36 The Info Grid shows some basic information necessary for the PIP Source Control. 1) PIP Source - The PIP Source can be controlled by turning on the monitor power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display to BNC.
  • Page 37 The info Grid shows some basic information necessary for the Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) is returned. Changing a value in this screen automatically changes the mode to "CUSTOM."...
  • Page 38 The info Grid shows some basic information necessary for the Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) is returned. Changing a value in this screen automatically changes the mode to "CUSTOM."...
  • Page 39 When Select All is selected, the default value (50) is returned. Changing a value in this screen automatically changes the mode to "CUSTOM." 1) Audio - Controls the audio settings for all input sources. 2) Bass - Adjusts the Bass of the selected display. 3) Treble - Adjusts the Treble of the selected display.
  • Page 40 An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows Maintenance Control for all input sources. 2) Auto Lamp Control Automatically adjusts the backlight of the selected display at a specified time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. 3) Manual Lamp Control - Allows you to adjust the backlight of the selected display regardless of the time.
  • Page 41 1. Click on Maintenance from the main icons and the Maintenance Control screen appears. 1) Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. 2) Screen Divider - The screen can be divided into several images.
  • Page 42 The Maintenance Control function is only available for displays where the power is ON. The Input source of MagicNet works only for the MagicNet model. 12. Troubleshooting 1. The display you wish to control does not appear in the Power Control Info Grid. - Check the RS232C connection.
  • Page 43 Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images.
  • Page 44 Input Available Modes : PC / BNC / DVI Description Source List Use to select PC, BNC or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is the 'SOURCE' button.
  • Page 45 Video signal. (Off/On) More than one PIP cannot be overlapped on screen as BNC and the component use the same terminal. 1) PIP - The direct button on the remote control is 'PIP' button. : Turns the PIP Screen Off/On. 2) Source - The direct button on the remote control is the 'SOURCE' button.
  • Page 46 Available Modes : PC / BNC / DVI Description MagicBright™ MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet,Text and Custom. Each mode has its own pre-configured brightness value.
  • Page 47 1) Red 2) Green 3) Blue If you adjust picture using Color Control function, Color Tone will turn to Custom mode. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness.
  • Page 48 Available Modes : PC / BNC / DVI Description Mode The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. - The direct button on the remote control is the P.MODE' button.
  • Page 49 The Film Mode feature offers you a theater-quality viewing experience. DNIe Demo - Digital Natural Image engine Samsung's new technology brings you more detailed images with contrast and white enhancement and 3D noise reduction. A New image compensation algorithm gives brighter, clearer images to our customers. DNIe technology will match every signal to your eyes.
  • Page 50 Description Mode The Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Selects Standard for the standard factory settings. 2) Music : Selects Music when watching music videos or concerts. 3) Movie : Selects Movie when viewing movies. 4) Speech : Selects Speech when watching a show that is mostly dialogue (i.e., news).
  • Page 51 Available Modes : PC / BNC / DVI Description Time Selects from one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer. 1) Clock Set : Current Time Setting. 2) Sleep Timer : Turns the Monitor off automatically at certain times. (Off, 30, 60, 90, 120, 150, 180) 3) On Timer : Turns the Monitor on automatically at a preset time.

  • Page 52: Resolution Select

    Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. 1) Video Wall : Turns Off/On the Video Wall function of the selected display Off/On. 2) Format : The format can be selected to see a divided screen.

  • Page 53: Multi Control

    (1~5 Seconds) By default, the time is set to 5 seconds. 1~5 Seconds Multi Control Available Modes : PC / BNC / DVI Description Multi Control Assigns an individual ID to the SET. 1) ID Setup : Assigns distinctive IDs to the SET. 2) ID Input : Use to select the transmitter functions of the individual SET.
  • Page 54 Available Modes : PC / BNC / DVI Description Moves to the Multi Control OSD screen. LOCK Sets the Safety Lock function. 1) Lock On : It will be locked. 2) Lock Off : It wil be unlocked. When setting the Lock function, you can only operate the power and lock buttons on the remote control and set.
  • Page 55 Self-Test Feature Check Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check Not Optimum Mode Maintenance and Cleaning Symptoms & Recommended Actions 1. Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

  • Page 56: Check List

    Do not use benzene, thinner or other flammable substances, or a wet cloth. We recommend that a Samsung cleansing agent is used to prevent damage to the screen. Never use acetone, benzene or thinner.
  • Page 57 Problems Screen is blank and power indicator is off "Check Signal Cable" message "Not Optimum Mode " message The The The The picture rolls vertically. The image is not clear; picture is blurred. The picture image is unstable and shakes. Ghost images are shown in the picture.
  • Page 58 Sound is too high pitched or too low pitched 4. Problems related to the Remote Control Problems related to the remote control and their solutions are listed. Problems The remote control buttons do not respond. Q & A Question How can I change the frequency? How can I adjust the resolution?
  • Page 59 15pin-to-15pin D-sub cable, detachable DVI-D to DVI-D connector, detachable Signal Connectors D-sub, BNC, DVI-D, YPbPr, S-VHS, VCR Power Saving SyncMaster 320P 32 " Diagonal (80 cm) 697.685 mm (H) x 392.256 Mm (V) 0.511mm (H) x 0.511mm (V) 30 ~ 70 kHz...
  • Page 60 Less than 5 W Dimensions (WxHxD)/ Weight 780 X 482 X 107 mm / 30.1 X 19.0 X 4.6 inch / 16.1 kg 780 X 530 X 223 mm / 30.1 X 20.9 X 8.8 inch (With Stand) - Option 982 X 482 X 107 mm / 38.7 X 19.0 X 4.2 inch (With Speaker) - Option 982 X 530 X 223 mm / 38.7 X 20.9 X 8.8 inch (With Speaker, With Stand) - Option VESA Mounting Interface...

  • Page 61: Preset Timing Modes

    Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.
  • Page 62 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A 1-800-SAMSUNG (7267864) CANADA 1-800-SAMSUNG (7267864) MEXICO 01-800-SAMSUNG (7267864) ARGENTINE 0800-333-3733 BRAZIL 4004-0000 CHILE 800-726-7864 (SAMSUNG) COLOMBIA 01-8000112112 COSTA RICA...
  • Page 63 09 693 79 554 FRANCE 08 25 3260 (€ 0,15/min) GERMANY 01805 - 121213 (€ 0,14/Min) HUNGARY 06-80-SAMSUNG (7267864) ITALIA 800 SAMSUNG (7267864) LUXEMBURG 02 261 03 710 NETHERLANDS 0900 20 200 88 (€ 0,10/Min) NORWAY 231 627 22 POLAND...
  • Page 64 TAIWAN 0800-329-999 VIETNAM 1 800 588 889 SOUTH AFRICA 0860 7267864 (SAMSUNG) 800SAMSUNG (7267864) U.A.E 8000-4726 Terms Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency.

  • Page 65: For Better Display

    Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 66 MÉXICO IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V. Vía Lopez Portillo No. 6, Col. San Fco. Chilpan Tultitlán, Estado de México, C.P. 54940 Tel: 01-55-5747-5100 / 01-800-726-7864 EXPORTADO POR: Samsung Electronics CO.,LTD. 416, Mae tan-3dong, Yeongtong - gu, Suwon City, Gyeonggi-do Korea...

  • Page 67: Product Information (Image Retention Free)

    PRODUCT INFORMATION (Image Retention Free) What is Image Retention ? Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (over 12 hours), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel.
  • Page 68 Use Bright colors with little difference in luminance - Cycle : Change the characters color and background color every 30 minutes Every 30 minutes, change the characters with movement. All area display Moving image together with Logo periodically. - Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use. The best way to protect your monitor from Image retention is to turn Power off, or set your PC, or System to operate a Screen Saver program when you are not using it.
  • Page 69 ( Please check CD's User Guide at "OSD Function", some model's will not available ) Apply the Screen Erasing function on Product Apply the Screen Erasing function - Symptom: 2 Vertical blocks move with erasing the display - Select method .

  • Page 70: Correct Disposal Of This Product (Waste Electrical & Electronic Equipment) - Europe Only

    Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

Table of Contents