Samsung SyncMaster 320PX Manual page 21

200.0 ( VESA MOUNT )
MACHINE M6 X L (8~12)
ot.,O
c;w
,o>
v
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.
6. Wall Bracket Installation
• Contact a technician for installing the wall bracket.
• Samsung Electronics is not responsible for any damages to the product or harm to customers when the
installation is done by the customer.
• This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Components(Sold separately)
Only use the components and accessories shipped with the product.
X L14 M4 X L8 M4 X L25
Screw: Screw: Wood Screw: Anchor:
A Wall-Bracket B Set-Bracket C 8 EA D 3 EA 15 7 EA F 7 EA
._ How to assemble the Wall Mount Bracket
1
1. Mark the location of hole on the wall.
2. Make over 35ram-depth-hole on the marked location using drill.
3. Fix anchors F on each hole on the wall.
4. Connect wall-bracket A to the wall with wood screws 15after fitting
anchors F into the wall-bracket A.
G installation Guide
If the bracket is not firmly fixed to the wall, set can fall off.
2 1. Turn the power off and unplug the power cord from the outlet.
2. Place the monitor faced down on a soft cloth or cushion on a table.
3. Attach the set-bracket B onto the rear side of the monitor set and secure the screws C.