Samsung SyncMaster 320PX Manual page 23

Select Language Main Page
Safety Instruct ens
Introduct on
Connections
Installing the Stand KtT
Connecting the LCD
Display
Using the Software
Adjust ng the LCD Disp ay
Treubleshooting
Speeificatiooe
Information
Appendix
SyncMaster
_Ttode_
The color and appearance of the product may vary depending on the model, and the product specifications are
subject to change without prior notice for reasons of performance enhancement.
Connections
Install ng the Stand K_T
[] Note
Only the supplied bolts should be used.
_ Caution
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified
nstaH ng the Semi Sta_d
Left stand Right stand
_X Caution
Make sure to install the stand with the Caution label
folded backwards
i
1) A 'Cover-Protecto¢ is used to protect the hole at the bottom of the LCD Display, where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or Stand KIT
(sold separately) and cover the hole using the 'Cover-HoW when attaching the wail mount kit.
2) Set up the left and right stands respectively
3) insert the stand into the hole at the bottom of the LCD Display
Insert the screw into the hole indicated and tighten it (M4 x L15)
Caution