Kubota WSM RTV500 Workshop Manual page 23

RTV500, WSM
• In separating connectors, do not pull wire harnesses.
• Hold connector bodies to separate.
(A) Correct
• Use sandpaper to remove rust from terminals.
• Repair deformed terminal. Make certain there is no terminal
being exposed or displaced.
(1) Exposed Terminal
(2) Deformed Terminal
• Make certain that there is no female connector being too open.
(A) Correct
• Make certain plastic cover is large enough to cover whole
connector.
(1) Cover
G-8
G GENERAL
(B) Incorrect
W10122720
(3) Sandpaper
(4) Rust
W1012346
(B) Incorrect
W1012430
(A) Correct
(B) Incorrect
W1012519
KiSC issued 09, 2008 B