Daily Use - Electrolux IK2720BL User Manual

The temperature LED indicator shows the
latest set temperature. Recommended setting
is +4°C.
To set temperature:
1. Touch temperature regulator button (7).
Current temperature indicator blinks.
2. Any time you touch the temperature
regulator button (7), the setting moves by
one position. When you select a
temperature, the LED corresponding to
selected temperature value blinks for a
while and the setting is fixed.
The set temperature will be reached
within 24 hours. After a power failure the
set temperature remains stored.
4.4 FastFreeze function
The FastFreeze function is used to perform
pre-freezing and fast freezing in sequence in
the freezer compartment. This function
accelerates the freezing of fresh food and, at
the same time, protects food products already
stored in the freezer compartment from
undesirable warming.
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete pre-
freezing.
To activate FastFreeze function press the
FastFreeze button (7) for 3 seconds. The
FastFreeze indicator switches on.

5. DAILY USE

5.1 Positioning the door shelves
To permit storage of food packages of
various sizes, the door shelves can be placed
at different heights.
1. Gradually pull the shelf up until it comes
free.
2. Reposition as required.
10 ENGLISH
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing FastFreeze button (7) for 3
seconds again. The FastFreeze indicator
switches off.
4.5 High temperature alarm
When there is a temperature increase in the
freezer compartment (for example due to an
earlier power failure), the freezer
compartment indicator flashes and the sound
is on.
To deactivate the sound press any button.
The freezer temperature indicator LED
continues to flash until the normal conditions
are restored.
If you do not press any button, the sound
switches off automatically after around one
hour to avoid disturbing.
4.6 Door open alarm
If the fridge door is left open for
approximately 5 minutes, the fridge
compartment indicator flashes and the sound
is on.
During the alarm the sound can be muted by
pressing any button. The sound switches off
automatically after around one hour to avoid
disturbing.
The alarm deactivates after closing the door.