Table of Contents
Advertisement
TROUBLESHOOTING
Mower is hard to push
Mower vibrates overly
and makes excessive
noise.
High grass and low
cutting height. Rear of
mower housing and blade
dragging in heavy grass.
The cutting blade is not
assembled securely.
The blade is not balanced.
The motor shaft is bent.
Raise the cutting height.
Tighten the blade bolts.
Sharpen and balance the blade
following instructions in this manual (see
page 23-24 ). Or replace the blade.
Stop the mower and unplug it from
the power supply. Have the mower
inspected and repaired by an authorized
service center before restarting.
27
Advertisement
Table of Contents
