Page 1
Roger Access Control System Metal Enclosure ME-40 Operating Manual Product version: v1.0 Firmware version: – Document version: Rev. C...
Page 2
Access to the internal space of the enclosure is protected by a door fixed by screws. Optionally, the door can be equipped with a key lock. The ME-40 is made of a metal sheet painted with an anthracite grey powder coating.
Page 3
It is forbidden to use PSU/transformer without properly performed electric shock protection. Caution Follow the instructions in the manual and/or data sheet. Failure to do so may result in equipment damage, electric shock, fire, injury, or other consequences. Fig. 2 Internal view of ME-40 enclosure Page 3 of 5...
Page 4
ME-40 Operating Manual .docx 2023-08-11 Fig. 3 Cable fixing method Fig. 4 Forming a cable entry hole in the bottom or top wall of the enclosure 3. S PECIFICATION Parameter Value Electric Protection Fused terminal block 5A/250V Tamper Protection Tamper contact NO/NC; 50mA/50VDC DIN Rail 2 ×...
Page 5
Weight of the equipment is specified in the document. Contact: Roger sp. z o. o. sp. k. 82-400 Gościszewo 59 Tel.: +48 55 272 0132 Fax: +48 55 272 0133...
Need help?
Do you have a question about the ME-40 and is the answer not in the manual?
Questions and answers