Subscribe to Our Youtube Channel
Related Manuals for Roger ME-5
Summary of Contents for Roger ME-5
- Page 1 Roger Access Control System ME-5 and ME-5-S v1.0 Metal Enclosure Document version: Rev. C...
- Page 2 DIN (T35mm) rail. Enclosure offers four mounting rails with a length of 380mm, tamper contact and place for dry gel battery 12V/17Ah. Optionally, as a ME-5-S, it can be offered with 13.8VDC/11A buffer power supply and power distribution module.
- Page 3 2. I NSTALLATION ME-5 should to be mounted on a vertical part of construction in a location protected from moisture, dust and in location which assures nominal operating conditions required for the enclosure and device installed inside. The 230VAC power supply cable must enter the enclosure through the dedicated cable bushing.
- Page 4 230VAC mains is disconnected. It is forbidden to use this equipment without proper and effective electric shock protection otherwise it may cause damage to device and/or fatal human injuries (e.g. electric shock). Fig.2 ME-5-S enclosure with power supply and power distribution module installed Strona 4 z 7...
- Page 5 PR402DR-12VDC 18 controllers 103h PR102DR Note: 1. The current balance sheet doesn’t include actuator attached to the controller 2. 12V/44Ah and 12V/70Ah batteries must be installed outside ME-5 enclosure Fig.3 Installation of nine PR402DR-12VDC (sample only) Strona 5 z 7...
- Page 6 Metal enclosure ME-5 and ME-5-S v1.0 Rev.C 2016-10-08 Fig.4 Installation of eighteen PR102DR controllers (sample only) Fig.5 Cable run and fastening Strona 6 z 7...
- Page 7 Metal enclosure ME-5 and ME-5-S v1.0 Rev.C 2016-10-08 4. O RDERING INFORMATION Product Description ME-5 Metal enclosure ME-5-S Metal enclosure with buffered power supply and power distribution module ML-1 Mechanical lock for ME-5 metal enclosure 5. P RODUCT HISTORY Version...
Need help?
Do you have a question about the ME-5 and is the answer not in the manual?
Questions and answers