Operating Instruction - Daikin FVFC71AV16 Installation Manual

Split system

Hide thumbs

Table Of Contents

Table of Contents

1.1 MODE Button

Press the MODE button to select the type of operating mode.

•

For cooling only unit, the available modes are: COOL ( ), DRY ( ) and FAN ( ).

•

For heat pump unit, the available modes are: AUTO ( ), COOL ( ), DRY ( ), FAN ( ) and HEAT ( ).

•

1.2 TURBO Fan Speed

Press the TURBO key once to activate Turbo fan speed. Turbo symbol will be shown. To disable

Turbo fan speed and back to previous fan speed, press the Turbo key once again. If user presses the

FAN button or turn off the unit, the turbo speed will be disabled. This speed is only valid during COOL

mode for selected models.

1.3 Automatic air swing

Press the SWING

•

To distribute the air to a specific direction, press the SWING

•

to the desired direction and press the button once again.

1.4 " " or " " Set Temperature Button

Press the temperature button and set the temperature of your choice by pressing " " or " " button

once, temperature changes by 1°C or 1°F. The default temperature setting range is from 16°C to 30°C

(60°F to 86°F). When the Option 20 - 30°C is set, the temperature range limit is set to 20°C to 30°C

(68°F to 86°F). Pressing both keys simultaneously will toggle the temperature setting between °C

and °F. No temperature setting is allowed during FAN mode (No set temp display). There is no room

temperature display.

1.5 FAN Speed Function

Fan speed can be changed via pressing the FAN key:

Low > Med > High > Auto >

*FAN speed is not available in DRY mode.

1.6 ON/OFF Button

Please allow 10 seconds for initialization during manual power on.

Starting Operation:

–

Press the ON/OFF button, the LCD will show full display and the unit is turned on.

Stopping Operation:

–

Press the ON/OFF button, the unit is turn off.

1.7 Power up Settings

The unit will start up with main board's last state setting during power up. If last state information is not

available, the unit will use the default settings. The default settings are as below:

Unit:

Mode:

Fan Speed:

Swing:

Turbo:

1.8 Key Lock

These key lock function inhibits any setting change. Press and hold both TURBO and SWING keys for 5

seconds will activate/deactivate the key lock function; "KEYLOCK" will be shown/disappear on Display

panel. Upon all the keys are locked, only ON/OFF, TURBO and SWING (to unlock) can be pressed.