Seat Assembly - DAAN Groups Voltz Toys FERRARI 488 PISTA SPIDER DG-82900 User Manual

BATTERY REPLACEMENT
• Unscrew the 2 pieces of screws #4 on battery board #8 one by one, and
take out the battery board, as shown in Figure.
• Unscrew 1 piece of screw #4 on battery lock #7, and take out the battery
lock, as shown in Figure.
• Unscrew 6 pieces of screws #4 on the cover plate one by one, and take
out the cover plate, as shown in Figure.
• Pull out the power plug of the battery #6 configured, then pull out the
battery plugs in the corresponding position on the main board one by
one, remove or replace the battery. Please make sure that it should be
the adult for replacing the battery.

2. SEAT ASSEMBLY

Parts required: #3
Place the seat to designated position, slide the front buckle to the opening,
and press it firmly until it locks.
7