Table of Contents
Advertisement
REMOTE CONTROL INSTRUCTION
NOTE: This product does not included the AA (1.5v)
Operation manual : For the first time to use (or replace the battery) need to
frequency bind.
1. To pair the remote with the vehicle, install two AA 1.5V batteries. Un-screw
and push the battery cover open on the back of the remote. Please pay
attention to the positive and negative polarity in the battery holder. After
installing batteries, close the battery cover.
2. Install the batteries into the controller. The LED indicator on the remote
control will blink and ready for pairing. Switch on the model car, the LED on
the remote control will go out. This means the pairing process is completed.
Then the model car can be fully controlled by the remote control.
Steering wheel
• Horn sound can be activated
when press.
11
Advertisement
Table of Contents
