Button Hold; Hold Function; Flashlight Function; Auto-Off - Sonel CMP-1010 User Manual

6.5 Button HOLD

6.5.1

HOLD function

This function is used to 'freeze' the measurement result on the
display. To do this, briefly press HOLD
tion is enabled, the display shows symbol H.
To return to the normal operation mode of the device, press
HOLD button again.
6.5.2

Flashlight function

Briefly press HOLD

6.6 Auto-Off

The meter automatically shuts off after 30 minutes of user inac-
tivity. Symbol
Auto-off function may be temporarily disabled. For this purpose:
 set the rotary switch at OFF position,
 press and hold MODE/INRUSH button,
 set the rotary switch at the desired measuring function,
 wait until the meter reaches the measurement readiness,
 release MODE/INRUSH button. When the automatic shutdown is
deactivated, the display does not show
Each pass of the rotary switch through "OFF" position with
non-pressed MODE/INRUSH button, will activate again the
Auto-Off function.
60
, to turn on or off the flashlight mode.
in the display indicates activated function.
CMP-1010 – USER MANUAL
button. When the func-
.