Change Of Set Points; Setpoint Editing From Display; Setpoint Editing From Bms; Change Language - Daikin UATYA-B Operation Manual

5 Faq
5.3 Change of set points
5.3.1 Setpoint editing from display
Go to the main menu and press "Setpoint" to access the screens where functions are displayed whose setpoints need to
be managed.
Go to the "Setpoint" sub menu and select the function whose setpoint is to be changed.
Scroll the parameters until the desired parameter setpoint is achieved.
Select the setpoint parameter to enable the edit keypad.
Set the new value and apply the green tick to confirm.
Units featuring mode switching have a setpoint for cooling "ST7" and a setpoint for heating "STH7".
The setpoint for cooling "ST7" must necessarily be higher than the setpoint for heating "STH7".
5.3.2 Setpoint editing from BMS
Setpoints can be edited from the BMS only if this function is enabled.
See dedicated BMS management document.
5.4 Change language
When in the main menu, press "Languages" to access the screens in which the available languages are displayed.
If the language you are looking for is not in the screen, use the arrows to find it.
The selected language becomes active as soon as it is selected.
Daikin R32 Rooftops UATYA-B Service manual
ESIE21-02 – 2021.03
119