Safety 1st Grow Manual page 15

23
1
Recline handle is at
Only use semi-
front of car seat.
reclined Position
2 if necessary to
Put Car Seat into
install the car seat
Position 1 & Place
fl ush against the
Car Seat Forward- vehicle seat back.
Facing in Back Seat
The vehicle seat back
MUST be upright.
2
If your vehicle has
a headrest that
interferes with a
Locate Vehicle Top
fl ush car seat fi t,
Tether Anchors
check your vehicle
owner's manual
Review your vehicle
to see if it can be
owner's manual for top
removed, adjusted,
tether anchor locations
or if there are other
and how to route the
possible seating
tether strap when there
locations for you to
are vehicle headrests.
install.
3 4
Lift Tether Loosely Attach
Tether Hook to
Adjuster to
Loosen Tether Vehicle's Top
Strap Tether Anchor
5
OR
Locate Forward-Facing Belt Path & Route
Vehicle Belt or Lower Anchor Belt Through It
For the LATCH belt: You may need to fully lengthen the belt
before routing it into the belt path. Squeeze the adjuster button
and pull the belt out as shown.
Thread the connector with the adjuster closest to it through the
Forward-Facing Belt Path opening as shown.
24
6
Vehicle Belt or Lower
Anchor Belt Goes:
• under the car seat pad; AND
• across the car seat; AND
• out the other Forward-
Facing Belt Path opening.
DO NOT twist the belt.
continued on next page