Accessory Use - Safety 1st Grow Manual

3

Accessory Use

Buckle Cover
(on select models)
For Use in Rear-Facing
Mode or Forward-Facing
Mode
To remove, undo the buckle
and pull the buckle cover off
the buckle.
Head & Body Pillows
(on select models)
Only For Use in Rear-Facing Mode
The head and body pillows MUST be
used together.
To remove head pillow, pull it up from
behind the back body pillow.
The body pillows are two separate
pieces: back and bottom.
To remove body pillows, undo the buckle and pull it through the slot
in the bottom pillow. Then remove the bottom pillow from the car seat.
Slide the back body pillow out from behind the harness straps.
If using the lower shoulder harness slots for smaller infants, see
page 44-47.
To rethread harness for upper harness slots, see page 48.
Removable Cup Holder(s)
(on select models)
For Use in All Modes
The cup holder(s) is top-rack
dishwasher safe.
To remove cup holder, twist the
cup holder counterclockwise. Pull
it out of the slot in the car seat.
Store until your child is large enough to use the harness
covers while maintaining a properly fi tting harness.
To remove, pull the fastening strips apart and pull the
harness covers off of the harness straps.
4
Harness Covers
(on select models)
For Use in Rear-Facing
Mode or Forward-Facing
Mode
The harness covers help provide
comfort to your child's neck.
If the harness covers will not
allow proper positioning of
the chest clip or interfere with
getting a tight enough harness fi t
for a smaller infant, remove and
do not use.