Safety 1st Grow Manual page 17

27
9
Tighten Tether
Push fi rmly on the back
of the car seat and
Hold the
pull the free end of the
Belt Path
tether strap to remove
dominant hand. Push and
all of the slack.
pull from side to side.
The car seat should not
move more than 1 in.
(2.5 cm).
10
If the car seat moves more
than 1 in. (2.5 cm), you can
try:
• Pulling the belt tighter; OR
• Reinstalling the car seat; OR
• Changing to a different
Check Belt
seating location; OR
Tightness
• Switching to a different
install method (LATCH or
Forward-Facing
with your non- vehicle belt).
FINISHED!
Vehicle Belt Install: Is the vehicle belt locked?
Lap/Shoulder Belt + Tether
See step 7.
for children up to 65 lb (29 kg)
LATCH: Lower Anchor Belt Install: Are the connectors
securely attached to the vehicle's lower anchors? See
step 7.
Lap Belt + Tether
Is the belt tightened enough so the car seat does not
for children up to 65 lb (29 kg)
move more than 1 in (2.5 cm) from side to side? Check
the tightness of the install often to make sure it has not
loosened. See steps 8 and 10.
LATCH: Lower Anchor Belt +
Has the tether been installed and tightened? See steps
Tether
4 and 9.
for children up to 40 lb (18 kg)
28