Harness System Adjustments For Smaller Infants - Safety 1st Grow Manual

43
5
4
1
2
3
Insert Buckle's Metal Reach Under Car
Seat Between Base
Retainer into Buckle
& Car Seat
Slot Closest to Child
Pull the buckle's metal
Tuck the ends of the buckle
retainer completely through
cover into the same pad
the seat pad and car seat.
slot as the buckle.
6
For Rear-Facing Child
Fit, see page 9.
For Forward-Facing
Child Fit, see page 20.
To learn how to check
harness tightness, see
pages 29-30.
Check Buckle
If you cannot achieve
a snug harness fit for
Pull the buckle up to make
sure it is secured. your child, see pages
44-47.
The buckle MUST NOT pull
out.

Harness System Adjustments for Smaller Infants

If you cannot achieve a snug
harness fi t for your child, you
may need to adjust the buckle
strap and/or harness strap
length and location as shown
in this section.
WARNING:
With Buckle in 1st
The harness system MUST
Slot, Fully Recline
be installed correctly. DO
NOT use a child restraint
If you need to move the
with damaged harness
buckle to the 1st slot, see
straps.
pages 42-43.
Adjusting Buckle
1 2
Pull Front of
Car Seat Pad Up
Car Seat
44
continued on next page