Further Display Options; Mass-Start; Stn Recognition; Time-Window - ALGE-Timing Timy2 Manual

2.8.1

Further Display Options

With pressing
With pressing
2.9

Mass-Start

Without turning the device off a new mass start can be initialized.
•
Enter the main menu
•
Select submenu PC-Timer/Mass Start
•
Timy2 asks if to clear or save the existing times
•
If necessary, a new time or a new date can be set
•
Press „OK" until "Wait for Start Impulse" appears
•
Timy2 is now ready for next start
2.10

STN Recognition

In case the recognition is activated in submenu
indicated with a star. Afterwards the automatic start order is continued. So if a start number is
entered deliberately, it is indicated by a start. Thus it can be distinguished between "automat-
ically generated" and "real" (manually entered) start numbers.
2.11

Time-Window

TIME-WINDOW
In the submenu
number to a new impulse is blocked.
2.12

Memotime

MEMOTIME
In the submenu
NOT PRINT – The memo times are not printed.
PRINT – The memo times are immediately printed indicated with "m".
After entering the start number always all times are printed (no matter what settings were
made).
2.13

Range

RANGE
In the submenu
Manual
TIMY2 – PC-Timer
and you jump to the beginning of the times list.
and you jump to the end of the times list.
can be set for how long the automatic allocation of a start
can be set if the memo times are to be printed.
can be set if the time restarts at zero after 24 or 99 hours.
STN*
, the manually entered start number is
Page 7