Adjusting The Controls - Viking Designer DDSF136DSS Use & Care Manual

Refrigerator Use

Adjusting the Controls

To adjust the set points, press and hold the COOLING button for 3 seconds. When adjust mode is
activated, set points and adjusting information will appear on the display screen.
NOTE: To view Celsius temperatures, press the FILTER button when adjust mode is activated. To return
the display setting to Fahrenheit, press FILTER again.
Refrigerator Controls
When adjust mode is activated, the LOCK and OPTIONS buttons adjust the refrigerator compartment
temperature. The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C).
•
Press LOCK to lower the set point.
•
Press OPTIONS to raise the set point.
Freezer Controls
When adjust mode is activated, the ICE and LIGHT buttons adjust the freezer compartment tempera-
ture. The set point range for the freezer is -5°F to 5°F (-21°C to -15°C).
•
Press ICE to lower the set point.
•
Press LIGHT to raise the set point.
CONDITION:
REFRIGERATOR too cold
REFRIGERATOR too warm
FREEZER too cold
FREEZER too warm/too little ice
Press COOLING to exit adjust mode, or allow about 15 seconds of inactivity and adjust mode will turn
off automatically.
TEMPERATURE ADJUSTMENT:
REFRIGERATOR Setting 1° higher
REFRIGERATOR Setting 1° lower
FREEZER Setting 1° higher
FREEZER Setting 1° lower
7